We recommend
BRILLA - Textile jacket - černá
Choose your size
48
50
52
54
56
58
60
62
64
To measure
What size am I?

In stock in the e-shop

Tlumačov

Plzeň

Do you want a different color?
BRILLA - Textile jacket
BRILLA - Textile jacket
My colors
1,584.56 €
DescriptionVideosPhoto galleryProtectorsReferenceRelated

Product Description

A technically sophisticated jacket for the people who love excellence! When developing the design, we made use of almost 30 years experience of our customers and knowledge coming from the co-operation with The University of West Bohemia in Pilsen that is involved in the project Safe Clothing on Two Wheels. We defined three parameters THERMAL COMFORT, MINIMIZING THE RISK OF INJURY and CUT FOR HIGH-SPEED DRIVING. The thermal comfort is achieved by an ingenious aeration and used materials which work in three independent layers, so-called ITS system (INDEPENDENT THREE-LAYERED SOLUTION). Hereby, the sufficient aeration is ensured by hot days which prevail within the active motorcycle season in our climatic conditions. For the case of cold, a part of the jacket is an inner separate wind-firm and rain-resistant sweatshirt. Two outer pockets are designed as 100% waterproof. Here the put things will certainly remain dry. The total protection against the rain is ensured by an upper rain coat. In order to minimize the risk of injury we came from the risk areas measurement (BODY AREAS BY RISK CATEGORIES). The surfaces which are burdened with a risk grade 1 and 2 are covered with high scuff-resistant material such as Kevlar or Super Fabric. The shoulders, elbows, back are protected by a combination of PSi® three-layer sandwich protectors and 3D foam Sas-Tec®. The passive safety of the driver is enhanced with a new patented system SCILIF SUNFIBRE that is a laterally flashing light guide enlightened with high performance LED that is powered by a battery-controlled microprocessor. The third requirement during the design development of the jacket was the comfort for high-speed driving when other textile clothing makes unwanted vibrations while exceeding the speed of 160 km/h. After the aerodynamic measurement we chose the most suitable combination of upper materials regulating the air circulation. All draw bands which caused a caving-in we replaced with a special tightening system that is regulated from the outside. The jacket you will fall in love with thanks to its timeless design, material and especially functionality! The author of this model is Libor Hubík, MSc.

Fit

  • men´s

Protectors

  • shoulders, elbows: Betac® 3D protectors from viscoelastic foam
  • backs: Sas-Tec® 3D protectors from viscoelastic foam
  • reinforcement of shoulders: Kevlar® from the Schoeller® company
  • reinforcement of arms and elbows: SuperFabric®
  • safety seams
  • for visualization: reflective elements a technology SCILIF SUNFIBRE® - light-guide cable

Pockets

  • front parts: 2 times inner pocket (under the trimmings), 2 times outer pocket loaded, 2x outer pocket 100% waterproof
  • sleeves: 2 times zip pockets
  • rear part: 1x longitudinal pocket over whole back with an option to increase its volume
  • lining: 2 times zip pocket with x-Shield SYSTEM MOBILE SAFE system
  • removable sweatshirt: 2 times zip pocket

Comfort

  • ingenious aeration system: ventilation control panels on the chest, ventilation zip-pockets on shoulders, sleeves and rear parts on the hips
  • long zip (80cm) for connection with trousers – protects from air blowing on the back and enhances the safety
  • collar: very comfortable absorbent limp-leather-bound material, fastening with magnet, circuit regulation (about 6 cm) that is patent fastened on both sides with inner tightening system, regulated from the outside
  • 3D lining on the back for reliable sweat dissipation
  • arm and waist circuit regulation that is patent fastened with inner tightening system, regulated from the outside
  • wrist circuit regulation by means of two patent fasteners
  • hips circuit regulation by means of flexible tapes
  • double front trimming ensures a reduction of air and water penetration, two zips on the trimming constitutes a mean of functionality in case that one of them is broken

Material

  • upper part: high-strength textile fabric CORDURA® 500 DUPONT, teflon-coated, Kevlar-stretched KEPROTEC®SCHOELLER® and stretched CORDURA®
  • reinforced parts: KEVLAR®, SUPER FABRIC®
  • lining: OUTLAST® technology for short-term temperature equalization
  • removable wind and water resistant sweatshirt with sleeve fine-knitted ending with an option to slide on the thumbs fro the fixation into the gloves
  • rain coat 75% polyester, 25% polyurethane, thermopress

Product video

Protectors

BRILLA_protectors_en.png - PSí Hubík

Reference

I made my mind up then and there to find a manufacturer that will supply me (a non racer) the same highest quality suit as the officially sponsored racers get. I want it to be made in the same factory by the same people from the same materials. PSI is that manufacturer! 

Simon Crafar

Did you know?

We produced our first integrated airbag race suit in 2016 for racer Ondrej Jezek, which was soon followed by our cooperation with Karel Abraham from MotoGP. Thanks to having our own production plant, right here in the Czech Republic, we are able to continuously participate in the ongoing development of airbag systems, and their implementation into motorcycle clothing for both on-track and off-road use.

Our pros

homeMade.png - PSí Hubík

Czech hand made

with tradition

tryOn.png - PSí Hubík

Possibility to try on clother

at the store

service.png - PSí Hubík

Own service

for customers

giftPackage.png - PSí Hubík

Gift packaging

with name tag